IndustriaHP

FLEXÓMETRO PARA CUERO SIMILAR BALLI MODELO MC 600

General Characteristics

12 simultaneus clamps.
Test speed under rules.
Cycle counter.
Initializing the equipment from zero.
Power supply: 380 V AC.
Sizes of the equipment: 600x600x250 mm.
Weight: 60 kg.

The Company

Active in the market since the last 35 years, our company manufactures laboratory instruments for control quality in leather, plastics, rubber, textils, yarns, foam rubber, boards, papers and by-products.

Our high tech, innovative-of-the-art equipment comprehensively meets today’s market needs. With a remarkable experience in international sales, INDUSTRIA HP has a wide range of clients all over Latin America who are fully backed-up by a wide and reliable net of official agents, devoted to povide full assistance and sevicing to our line of products. Our high tech, accurate line of instruments are tested by specialized industrial engineering.

INDUSTRIA HP produces more than 50 models, which are guarantee-certified and are also supported by a calibration technical service.

INDUSTRIA HP is also familiar in developing tailor-made equipment according to the client’s needs. Our main purpose is to assure guaranteed satisfaction to the client towards our line of products.

Address: Mármol 1023
Lanús Oeste - Buenos Aires - Argentina
Phone: 54-11-4240-7537

Endereço: Rua Riachuelo 2323
Centro - Rosario Do Sul RS Brasil
CEP 97590-000
Fone/fax: (55) 55-3231-7998

industria-hp@industria-hp.com

Representantes

Nuestra empresa dispone de representantes en:

Brasil
Chile
Colombia
México
Perú
Venezuela.

Si desea, puede realizar consultas al respecto aquí.

LASTOMETER MODELO MC 700

General Characteristics

Totally digital.
Direct lecture of the strength, in kilograms.
Maximum weight applicable 100 kilograms.
Minimum lecture sensibility of 100 grams.
Retention of the maximum result when the test is finished.
Whit digital count- milimetres to determinate the height reached by the valve rod till the moment of break.
Cylindrical valve rod with spheric point of
ø 6.25 mm of diametre.
Manual running of the test
Weight: 37 Kilograms.
Size of the equipment: 450 x 180 x 170 mm.
Manufactured under rules.
Power supply: 220v. AC/50-60 hz.
.

VISCOSÍMETRO ELECTRÓNICO COMPUTARIZADO MODELO VM 1000

General Characteristics

Digital temperature of both plates in centigrade degrees.
Regulation with a microprocessor of the both from 80° C up to 180° C
with calibration in any medium point.
Work sensibility +/-2 decimes of degree.
Lukewarm glass screen with automatic front closing.
Control panel with membrane.
Microplates.
Quick heat up(ambient temeperature up to 160° C in only 10 minutes.
Quick temperature re- graduation (10-20 segundos).
Minimum potency used: 800 watts.
Traductor of lecture of the stength of the motor exit.
Rotataion frecuency: 2 rpm.
Volume of the sample to evaluate: 27 cm ³.
Running from frontal membrane.
Two rotors: big and small, both under rules.
Calibrator certificate.
Automatic closing of the rotor mouth piece.
Power supply: 220 v AC, 50/60 hz.
Signal processing: viscosimetre/ PC RS232.
Automatic callibrator for dead weight, just touching a key.
Software manuals in Spanish, Portuguese and English.
With own software (VISC 01) you can check the vulacnization on screen,
save the informatiom in a file, compare information and graphics of all test made.
Strength lecture every 10 decimes of second.
Printing of all the information (text and graphics), everything in colours.
Automatic of every characteristics results of the test.
Field to put hradness, clients, names, numbers oflot, components, etc.
Compatible files (of text).
Quality limits about main files (including a print).
Statistic calculation of the required information.
Runs under Windows 98 or later.
Simultaneus presentation of viscosida an relaxation.

DINAMÓMETRO DIGITAL MODELO D 200

General Characteristics

Economic type one column.
Digital direct reading of the load.
Digital direct reading of the elongation between clamps.
Retetion of both maximium values once the test is over.
Maximum load to be tested 100 kilograms, sensibility: 10 grams.
Variable speed from 5 to 500 milimetres per minute.
Automatic stop of chosen distance.
Set of clamps according what it is needed.
With PC outlet
Software in spanish, english, portuguese (not licensed).
Necessary software Windows 98 or superior.
Automatic calculus of the characteristic values.
It saves in the disk all the required tests.
Re-plotting of curves including curves of different compounds in the same scale.
Infinite print of curves with the avarage values of the requested curves in the
same sheet of paper.
Superposition of up to twelve curves, each one in a different colour
(quick indentification).
Compatible files.
Field to introduce hardnees, density, width, thickness, etc.

PLASTÓMETRO MODELO P 300

General Characteristics

Digital temperature indicator order by a microprocessor.
Temperature regulation up to 300º C.
Work sensibility +/- 1º C.
Quick termic re-graduation.
Mouthpiece calibrated under rules.
Main axis graduation.
Four dumbebells under rules.
Digital chronometer active 10 decimes of second
after incorporated.
Work tools.
Voltage: 220v - 50 - 60 hz.
Size of equipment: 350 x 350 x 700 mm.
Weight: 50 kg.

MÁQUINA PARA ENSAYO A LA COMPRESIÓN DE CAJAS
DE CARTÓN MODELO HD 750 TOTALMENTE COMPUTARIZADA

General Characteristics

Direct digital lecture of the burden.
Direct digital lecture of the compression.
Retention of both maximum results after the test.
Maximum weight to test: 1000 kg or 2000 kg, sensibility of 100 g.
Testing speed up to 13 mm per minute, under rules.
Quick return speed.
Distance stop selected automatically.
Competent to test boxes up to 600x700x1000 milimetres.
Automatic stop when test is finished.
Calibrated universal dumbbells certificate.
Power supply: 220v.- 50/60 hz.
Pc software available in spanish, english and portuguese.
In the software you could check out all the tests on the screen, and you could get inmediality:
Testing burden with its graphic.
Field to put the names of the customers, tested materilas, code, date, supplier, number of lot, etc.
Compatible files (text files).
Storing information in your hard disk about texts and graphics.
Lecture of the strength of any milimetre of compression up to the collapse.
Superposition up to eight test in many different colours, with it’s print and medium values.
Runs under windows 98 or superior.

MULLEN TESTER MODELO MPDX 2000

General Characteristics

Neumatic closing of the test tube to test.
General running of the neumatic equipment.
Hydraulic running of the glicerine bomb.
Crumbling speed under rules.
Digital manometre.
Maximum capacity of crumbling up to 350 lb.
Selection of the sacles in libres or kilograms.
Lecture sensibility of 1 libres or kilograms.
Retention of the maximum value of crumbling.
when the test is finished.
Power supply: 220v. AC 50/60 hz.
Size of equipment: 600x400x450 mm.
Weight: 58 kg.

TESTER VESLIC MODELO MC 800

General Characteristics

Electric operating.
Auto-determinator for automatic stop,
for many different cycles (as you wish).
Extension of the tested material up to 25% maximum.
Easy and quick introduction and extraction of the tested material.
Testing piece size: 15 x 15 mm.
Manufactured under rules.
Size equipment: 330 x 380 mm.
Weigth: 47 Kg.
Power 220 v. AC/50-60 hz.

BALANCÍN DE LABORATORIO MODELO HM

General Characteristics

Appropiate for laboratories.
Manual and hydraulic.
Maximum distance traveled by opening: 90 mm.
Quick return.
Specials hollow punch accoprding to standard about tempered steel.

ABRASÍMETRO DIN SEGÚN NORMAS DIN 53516

General Characteristics

With micrometrical adjustment and ejector
Distance traveled by the sample 40 metres
Cylinder 150 milimeters
Diameter of the flask to be tested: 16 milimeters
Automatic beginning and of the test
Revolving flask holder
Abrasive sandpaper grain 60 according to standards
Hollow punch to take out the sample

IZOD CHARPY MODELO IC 1000 COMPUTARIZADO

General Characteristics

Direct reading of the arc of impact
Both impactors (IZOD or CHARPY)
Whit PC outlet
Software in Spanish, English and Portuguese
Necessary software Windows 98 or superior
Automatic calculus of the
Characteristic values
Field to introdece client,date,width, thikness, arc,supplier,sample, etc.
Colour print of the obtained values.

ESTUFA PARA ENVEJECIMIENTO
ACELERADO DE MATERIALES MODELO CT300

General Characteristics

Digital thermostat up to 300º C.
Cuttof sensibility +/- 1º C.
Stainless steel internal furnace.
Useful measures of the standard furnace: 400 mm x 400 mm x 400 mm.
With forced air.
Air renewal.
Built according to ASTM standards.

DINAMÓMETRO ELECTRÓNICO DIGITAL MODELO D 500

General Characteristics

Digital direct reading of the load.
Digital direct reading of elongation between champs.
Retetion of both maximum values once the test is over.
Traction and compression.
Maximium load to be tested 500 kilograms, sensibility: 10 grams.
Digital variable speed from 5 to 500 milimitres per minute.
Automatic stop of distance.
Set of clamps according what it is needed.
Whit auxiliary extensometer to determine modules in flaks of traction whith an opening of 25.4 milimetres up to a maximium distance of 1000%
between marks.
With PC outlet.
Software in spanish, english, portuguese (not licenced).
Necessary software windows 98 or superior.
Automatic calculus of the characteristic values.
It saves in the disk all required test.
Re-plotting of curves with the avarage values of the resquestd curves in the same sheet of paper.
Superposition of up to twelve curves, eachone in a different colour
(quick identification).
Compatible files.
Field to introduce hardness, density, width, thickness, etc.

DURÓMETRO CON SOPORTE MODELO DSAX

General Characteristics

Suitable for laboratories.
Manual operatin of the test.
Base with height adjustement.
Durometer according to Shore A or B standars.
Additional weight of 1 or 5 kilograms according to the durometer.
Optional digital Durometer with timer.

GRAVITÓMETRO ELECTRÓNICO DIGITAL MODELO G 100

General Characteristics

Totally digital.
Maximum load of the flacks to be tested up to 100 grams.
Load reading sensibility: 1/100 grams.
Tare of zero.
Self calibration and check-up system.
Mobile bearing to introdece the flacks.
It can also be used as a balance.
Feeding: 220 volt monophasic, 50/60 hz.

FLEXÓMETRO DE MATTIA MODELO FG

General Characteristics

It performs rubber and elastomer fatigue test in one- inch wide samples by respeated bending or stretching out.
This apparatus has capacity for 5 simultaneous flasks.
Automatic counter to register the benings.
Traction by a three- phase current motor.

REÓMETRO MOVING - DIE H.P. MD - 2002 / E

General Characteristics

Digital temperature of both plates in centigrade degrees.
Regulation with a microprocessor of the both from 80° C up to 200° C with calibration in any medium point.
Work sensibility +/-2 decimes of degree.
Lukewarm glass screen with automatic front closing.
Control panel with membrane.
Microplates.
Quick heat up (ambient temeperature up to 150° C in only 10 minutes.
Quick temperature re-graduation (10-20 seconds)
Minimum potency used: 800 watts.
Traductor of lecture of the stength of the motor exit
Angle oscilation: 0,5 º
Volume of the sample to evaluate: 4 grams.
Runnig from frontal membrane.
Calibrator certificate.
Power supply: 220 v AC, 50/60 hz.
Automatic calibrator for dead weight through software and hardware,
just touching a key.
Software Manuals in spanish, portuguese and english.
With own software (REOM 03) you can search the vulcanization on screen,
save the information (text and graphics) everything in colours.
Automatic of every characteristic results of the test.
Field to put hardness, clients, names, date, numbers of lot, components, etc.
Compatible files (of text)
Quality limits about main files (includes a print)
Statistic calculation of required information.

DINAMÓMETRO ELECTRÓNICO DIGITAL MODELO D 100

General Characteristics

Digital direct reading of load.
Digital direct reading of compression or traction in milimetres.
Retention of both peak values on completion of testing.
Maximum load of test equal to 100 Kg, 10 gramme - sensibility.
Compression and tensile test devices.
Automatic stop of close distance.
Voltage: 220 V. , 50-60 Hz.
Set of universal self - adjustable clamps.
With PC Outlet.
Software in spanish, english, portuguese (NOT LICENSED).
Automatic calculus of the characteristic values.
It saves in the disk all the required tests.
Re-plotting of curves including curves of different compounds in the same scale.
Indefinite print of curves with the avarage values od the requested curves in the same sheet of paper.
Superposition of up to eight curves, each one in a different colour.
Compatible files.
Working tools.

EQUIPO PARA ENSAYOS DE COMPRESIÓN Y TRACCIÓN
MODELO HDM - Manual

General Characteristics

Digital direct reading of load.
Digital direct reading of compression or traction in milimetres.
Retention of both peak values on completion of testing.
Maximum load of test equal to 200 kg, 10 grams - sensibility.
Compression and tensile test devices.
Overall maximum opening: 420 mm.
Voltage: 220 V., 50-60 Hz.
With PC Outlet.
Software in spanish, english, portuguese (NOT LICENSED).
Automatic calculus of the characteristic values.
It saves in the disk all the required tests.
Re- plottin g of curves including curves of different compounds in the same scale.
Indefinite print of curves with the avarage values of the requested curves in the same sheet of paper.
Superposition of up to twelve curves, each one in a different colour.
Compatible files.
Working tools.

EQUIPO PARA ENSAYOS DE COMPRESIÓN / TRACCIÓN
MODELO HDX 500

General Characteristics

Digital direct reading of load.
Digital direct reading of compression or traction in milimetres.
Retention of both peak values on completion of testing.
Maximum load of test equal to 500 kg, 100 grams - sensibility.
Compression and tensile test devices.
Automatic stop of close distance.
Overall maximum opening: 500 mm.
Voltage: 220 volts, 50-60 hz.
Testing platform.
With PC outlet.
Software in spanish, english, portuguese (Not licensed).
Automatic calculus of the characteristic values.
It saves in the disk all the required tests.
Re- plotting of curves including curves of different compounds in the same scale.
Indefinite print of curves in the same sheet of paper.
Superposition of up to eight curves, each one in a different colour.
Compatible files.
Working tools.

PUNTO DE FUSIÓN

General Characteristics

Digital temperature up to 300 º C.
Diameter plates 70 mm.
Work tools.

CORTADORA

General Characteristics

The equipment to cut to samples or flaks is an effective instrument for the preparation of samples to try, obtaining a constant volume that analyzes compounds in its exact sizes.
Offering this way an precision exactness in the tests of the Reomethers MD 2002,MD2002/TG and Viscosimeter Moomey WM1000

DURÓMETRO ANALÓGICO MECÁNICO

General Characteristics

According to ASTM D 2240
international Standards.
Portable, manual or table durometers.
100- division quadrant reading.
Scale of hardness from 1 to 100 Shore.
Minimum reading 1 shore.

ABRASÍMETRO TABER MODELO ATD

General Characteristics

Suitable for tests in rubbers, leathers, textiles, paints, etc.
Weight of abrasive wheels according to standards.
Preset meter with automatic cycle stop.
Voltage: 220V., 50-60 Hz.
Weigth: 50 kg.

EQUIPO PARA ENSAYOS DE REBOTE

General Characteristics

Manufactured according to standards.
Weight: 10 Kg.

EQUIPO PARA ENSAYO DE FATIGAS

General Characteristics

Manufactured according to standards.
Fixed speed.
Adjustable opening of testing sample.
Cycle Counter.
Rugged construction.
Weight: 90 Kgr.

CELDA DE CARGA CON INDICADOR DIGITAL

General Characteristics

Portable

Retention of peca value.
Maximum load as required (1 TO 20000 KGR).
Automatic zero adjustment.
Optional
Elongation or compression digital reading in milimeters.
Battery ignition.
With PC outlet.
Compression and tensile.

BATA BEL

General Characteristics

This equipment is used to measure the resistance to the flexion of shoe sole.
The shoe sole are stuck or sewn in the external part of the strap.
The strap is mounted on two pulleys, one of greater size and another smaller.
When happening the shoe sole through the pulley smaller causes the movement of flexion of the shoe sole.
Smaler Pulley: 60,90,120 mm.
Greater Pulley: 225 mm.
Large of strap: 1950 mm .
Weigth: 120 kg.
Digital accountant programmable.
Frequency: 90 cycles/minutes.
220/380 v. -50-60Hz.

CARGA DE INDENTACIÓN MODELO HD 200

General Characteristics

Digital direct reading of load.
Digital direct reading of compression in milimeters.
Retention of both peak values on completion of testing.
Maximum load of test equal to 200 kg, 10 gramme- sensibility.
Compression test devices.
Automatic stop of closen distance.
Overall maximum opening: 400 mm.
Voltage: 220 v, 50/60 hz.
Perforated bottom platform for testing.
Testing platform.
Round top platform.
With Pc outlet.
Software en spanish, english and portuguese (NOT LICENCED).
Automatic calculus of the characteristic values.
It saves in the disk all required test.
Re-plotting of curves including curves of different compounds in the same scale.
Indefinite print of curves with the avarage values of the requested curves in the same sheet of paper.
Superposition of up to twelve curves, each one in a difeerent colour.
Compatible files.
Working tools.

ELMENDORF MODELO MP 50

General Characteristics

Preshear blade.
Graduated dial, 0 to 100.
Major action weight of 1600, 3200, 6400 grammmes.
Manual test starting

IMPACTO AL DARDO

General Characteristics

Pneumatic closure of test tube holder
Electromagnet for dard holding
Dard according to standards
Adjustable distance of dard fall
5 –inch test tube holder

PRENSA DE LABORATORIO

General Characteristics

SHL Model

Base Type.
Electrically - Heated Plates.
Digital Thermostat, separate for each plate up to 250 grades centigrades, cut +/-1 reading degree.
Standard Plate Measures, 250 x 250 mm, effective.
4 - column guidance.
Manual rising and descending hydraulic drive.
Plate opening: 250 mm.
Working pressure gauge.
Oil level indicator.
Indicating sensors.